Tuesday, June 19, 2012

Pop the Top Walldog Event, Arcola, IL June 20 - 24, 2012

Well, we are packing up to head down to this Summer's mural event being held in Arcola, Illinois. We will be joining together with approximately 140 of our fellow artists, to paint up another Midwestern town.


 This year there are artists coming from New Zealand, Australia, Scotland, and several from Canada. Arcola has lined up 15 large-scale exterior murals for us to paint during this 4 day event. 

 At this year's event, my wife and I will not be leading a project. instead we will be helping our friends wherever we are needed the most. At last year's event, my wife and I were busy planning our wedding, so we were not able to help paint as much as we like. But this year, we can help as much as possible.

Earlier this year I decided to build a new stereo system for Walldog events. As long as I can remember, I've always loved to listen to music while I work. This of course has carried over to mural painting. So this year I finally pulled out all the stops and decided to build the system I've been thinking about for years. 

If you're not familiar with mural painting or Walldog events, I will explain one of the first steps of the process to try and make more sense of my sound system idea. 

The first night of a Walldog event, is generally set aside to project the art on the wall. We use overhead projectors with the art printed on clear transparencies. Recently, the city hosting the event turns off the street lights in order to make the projected images easier to see. We project and draw the images on to pre-primed white walls. 

 Not sure about you, but when I see a big white wall, my minds starts to tell me to put something on it.

After the projection process, we usually hang around and catch up with old and new friends. I always thought it would be fun to build a surround sound system with an on-board digital projector. I was finally able to find the components to make this idea a reality. So, I spent the last couple of months designing and building my (somewhat portable) audio/video Walldog system. Here is a couple pics of the unit...


 


 

 This contraption of mine includes the following features...

 1000 watt Panansonic Surround Sound Home Theater System (5 speakers, sub, amp)

 The system plays DVD's upscaled to near HD, and includes an FM tuner.

An iPod dock built in with controls that show up either on the 7" LCD screen or on the projected image.

Can be hooked up to an iPad to play audio, video, slideshows, YouTube, and Netflix (when WiFi is available).

 Includes a ViewSonic DLP digital projector mounted on a 4-way swivel base so we can project out the front, sides, or back. The projector unit is also mounted on slides so it can be removed and positioned on top of the system.

3-way video control switch to feed the different video sources.

A digital clock built in with dual temp displays....which includes a remote temp sensor for secondary temp readings. I can hang the remote sensor on (or locate it near our wall) to determine how hot the painting surface is.

Ground effects LED lighting and an LED "night light", both with on and off switches.

There is also a 12 volt cigarette lighter jack for cell phone and USB charging when needed?

 All of this enclosed in a perforated steel structure with 4 Monopod legs and four tripod extension speaker mounts.


So, I will be trying to update the blog from Arcola's event with pictures. This all depends on the access to WiFi in the area. And how late I work into the night.

 Till then....

Monday, April 9, 2012

CNC Router Setup

I have had a few requests regarding a CNC router setup technique and thought I would detail it here on my blog. This is setup I have used for a wide variety of softer materials and I would not recommend the following setup for any type of metal.

That being said, perhaps I should preface this description with a bit of my background. In the late 90's I was employed at a prototype shop in Northern Wisconsin. Our clients included, Compaq, 3M, U.S. Army, Fiskars, NCR, among many others.

In that particular shop, we used 3 & 4 axis VNC's (vertical machining center), and a 5 axis router table type machine. I used this technique at that shop daily for 3 years to cut hundreds of parts.

Below is an example of the machines we used. Milltronics VNC for 3 and 4 axis work, and a Motion Master 5 axis CNC router table.



And here is a few samples of the work we were doing.


Milling a Compaq laptop base for a presentation prototype out of RenShape modeling board.


Urethane clear casted complete laptop, used for smoke-flow fan performance testing.


Infrared firefighter camera.


Another infrared camera application.



And a few non-functional tape measure prototypes.

Now on to the pin location cut method Procedure.

In order to use the location pin method of cutting, you need to adhere a waste board to the router table. You can use either a sheet of ABS plastic or MDF. Which ever you choose, it just has to be dense and thick enough to support the pins you will be using to locate your part. There are a couple of things to point out about this step of the process.

1. The waste board has to be flat and parallel with the router table.
2. It needs to be secured to the table so it will not move during the process. (we did not use a vacuum table)
3. It needs to be larger than the block your part is being cut from.

You should tape down the waste board and fly-cut both sides to ensure the top surface is parallel with the router table.

There are few benefits to using ABS for your waste board. It is more stable than MDF. You can patch your drill holes by super-glueing ABS rods (the same size as your location pins) then fly-cut it smooth again. It holds your location pins in place much more securely than MDF.

If you are using MDF for a waste board, it is necessary that you spray paint the surface you are applying the tape to, which will ensure a good bond with the tape. This is also highly recommended with any porous and powdery substrate you are trying to tape down.



Above is a diagram of the process of setting up to cut your part block.

The best tape I have found for taping your waste board and part stock to the table is (Nitto) Permacel 2" wide double sided craft tape. It is .007 thick and can be "loosened" after use with some denatured alcohol if you need help in getting your stock loose. you can find the tape here if you need to order some: http://www.findtape.com

So if you look at the diagram above for reference, I will try and walk through the steps for cutting a one-flip part. (click on the image to enlarge it)

1. Attach and fly-cut the waste board to table with the Permacel tape.
2. Cut stock to a size that allows a bit of extra room for location pins on each end.
3. Locate part stock on table and make it's thickness parallel, using the same fly-cut method you did for the waste board.
(Remember to spray the substrate with gloss spray paint and let it dry completely before trying to apply tape to it. This is absolutely necessary with a substrate like urethane foam modeling boards.)
4. When setting up you tooling path , your first tool should be a drill (tool path) that drills down through the part block and into the waste board but not into the router table!
5. Install location pins in the location pin holes (threaded pull-out dowel pins are available at mcmaster.com) slide permacel taped substrate in place over location pins.
6. Run all tool paths on first side. It might be necessary to set your depth of cut on the first side so there is a web of material to help support the part when flipped over to cut the second side.
7. Pull the pins out of the block and carefully pry your part off the table. (mcmaster also sells pin pulling devices like in the pictures below, to aid in pin removal.) Once again, you can wick some denatured alcohol under the part, to help loosen up the tape. Just make sure it is wiped completely dry before you stick the second side down.
8. Flip the part over in the same orientation (axis) that you used when setting up the tool paths.
9. Apply Pemacel tape to second side and slide part block over location pins.
10. Run all the second side tool paths. (here again it may be necessary to leave a bit of webbing around the base of the cut to secure your part in the block. A final outline cut of the part will free it from the block.
11. Pull pins and pry left-over stock off the waste board.










So there you go...quite simple really. You are probably asking, what could I possibly ever cut out with this method. What if you wanted to add a 3 dimensional spoon to a restaurant sign? Set up the file, then use the steps above to cut most any non-symmetrical part you need to cut.

If you have any questions just post them in the comments section below, and I'll try and help you out.....thanks

Sunday, March 25, 2012

Charity Auction Events

In my last post, I started painting a Harley Davidson mural in my basement studio. Once again, I have wandered away to perform other tasks and haven't updated my blog page for a while. This time I think I have a good reason. I will get back to the completion of the Harley mural after I take this short break to describe the charity events that I am involved with.

In the dead of winter, when most people are waiting to watch the Super Bowl, I begin to think about panels I can paint and donate to the World of Wheels Charity Auction events. For the past 10 years the Pinstripe Legends group has gathered at the Milwaukee World of Wheels car show. All the money that is raised from several auctions during the weekend event is donated to the Children's Hospital of Wisconsin.

There is another group called the Chicago Brushmasters that has been gathering to do a similar event at the Chicago World of Wheels show. The Brushmasters have been active since 2008 and donate 100% of their proceeds to the worlds largest Ronald McDonald in Chicago.

Back in 2008 I relocated back to the Milwaukee area and learned about the Pinstripe Legends Charity event from a friend. Even though I am not really a Pinstriper, I decided to attend my first charity auction event in 2009. This year marks my fourth year of helping out at the Milwaukee event. Here is some of my donations from the events...

First few panels here were sold at the Pinstripe Legends event in Milwaukee, WI....












The last two panels shown here were donated at the 2012 Chicago Brushmaster's Charity Auction Event....which raised around $63,000 for the Ronald McDonald House.





So far it's been a fairly productive year. Next up, I am putting the finishing touches on a new web page, more on that in a bit.

Take care for now.

Sunday, January 1, 2012

Harley Logo - Sepia Tone

It seems that life tends to sweep me away from posting for a couple months at a time. Between writing a book for my new Grandson, full-time work, finishing a sign and getting through the holidays, it not too hard to see where the time has gone?

I did get a good start on my sepia tone basement wall mural and wanted to share the progress. (Here is a link to the wall prep for this project).

In some ways, the sepia tone technique is new to me so I will describe the process as I go along. In my last post, I included a couple of images of the old Harley Davidson art that I was hoping to paint on the wall. I really like the sepia tone look of the board racer image and decided to paint the old Harley logo in the same colors.

The very first step in this process is to purchase the paint that will be needed to complete the mural. A short while before we started this project, my wife and I stumbled upon some new paint to try. Rust-Oleum produces a water-based metallic line that comes in 2 oz. trial size containers. We ended up buying four colors that we thought would best match the sepia tone pallet we had in mind for the board racer mural. These colors have a pearl like appearance so we were not sure how well they were going to match the Nova Color acrylics, but it's worth a try?

Next step was to project the image on the wall as large as we could make it. I used an overhead projector with our art, inkjet printed on clear transparency film.









I used a #2 pencil to sketch the logo on the wall. Because there is always some distortion caused by the projector, I had to go back in with a level to correct some lines. This is especially apparent when there is vertical lines on the wall to compare the layout to.




Next up, I started to apply some of the Metallic Accent colors on the wall following the pencil layout lines. The champagne color below is not wet, but it is metallic so it reflects light at certain angles.




The Rust-Oleum Metallic Accent colors tended to go on a bit light and usually required two coats. Even with two coats, some "pooling" of paint still occurred. I believe that this was the result of applying water-based paint over the WaterTite oil-based water proofing wall paint. This "pooling" effect actually made the Rich Brown accent color take on a worn leather or suede look. Even with the unexpected color results, the Accent paints look like they bonded well with the base coat.

Here is the logo with a couple of the colors completed. I don't recall ever seeing the Harley logo done in sepia tone, so I made up my own color pallet.




Here is the finished logo...





My next post will show the layout and painting of the board racer portion of the mural. I'm looking forward to exploring further, the process of sepia tone painting with Nova Color Artist Acrylics.